D60

Full HD Home Theater

Full HD Home Theater

LIGHT ENGINE

Technology:: 1 chip DMD 0.95” 1080p DarkChip3™ Resolution:: 1920 x 1080 pixels Lens:: High quality, high resolution optics with both manual zoom and focus adj. Full BrilliantColor™ technology Variable Iris and Dynamic Black™ technologies Lamp power & average life time*:: 200W, 2500 hours

INSTALLATION

Throw ratio:: 1.84-2.2:1 Electronic lens shift:: V +60% / -40% Digital keystone adjustment:: V/H +/-30° Picture size (inches diagonal):: 50-200 Aspect ratio:: 4:3, 16:9 Anamorphic, LetterBox, panoramic, pixel to pixel

ELECTRONICS

Horiz. & vertical scan frequency:: 27-90kHz/ 50-85Hz; 24 Hz (1080p only) Video & Graphic standards:: PAL (B,G,H,I,M,N,60); SECAM; NTSC 3,58; NTSC 4,43 automatically selected; HDTV: ATSC (480p, 576p, 720p, 1080i, 1080p + 1080p 24Hz) PC graphic:: VGA, SVGA, XGA, SXGA, UXGA Contrast ratio (with Dual Iris):: >10000:1 Contrast ratio (typical):: >4000:1 Format Board:: 10 Bit Video processor:: built in Noise level:: 25 dBA in whisper mode Full BrilliantColor™ and DynamicBlack™ technologies

INPUTS/OUTPUTS

Analog::1 x Composite Video (RCA) ::1 x S-Video (mini Din 4 pin) ::1 x Component Y/Pb/Pr (3x RCA) ::1 x Analog RGB HD (BNC x 5) Digital::2 x HDMI™-HDCP Control:: 1 x RS232 (8 pin Mini Din) Miscellaneous::1 x OUT 12V on Jack connector

GENERAL SPECIFICATIONS

Software control:: upgradable via RS232 serial interface Power consumption:: 290W max Mains voltage range:: 90-264Vac ±10% (50/60Hz) Dimensions (WxHxD):: 492x180x420 mm (19.4”x7.1”x16.5”) Weight:: 9.6 Kg. (21.2 lbs)

ACCESSORIES

Supplied::Installation and User Manual ::AC power cords (EU, UK and USA) ::Backlit remote control and batteries ::Component video cable
(*) Lamp life: the hours quoted have been measured in a lab under ideal test conditions. Lamp life varies depending on usage conditions and the surrounding environment. This is an average value that cannot be guaranteed and is not protected by warranty. The DLP® logo and DLP® medallion are trademarks of Texas Instruments.

Due to constant product development, specifications and design might be subject to change without notice.