Lumis HC 3D-D

The SIM2 solution for High Quality Active AND Passive 3D stereo images

The SIM2 solution for High Quality Active AND Passive 3D stereo images

C3X LUMIS LIGHT ENGINE

DLP® Type:: 3x 0,95 DC4 DMDs Resolution:: Full-HD 1920x1080 pixels Special features:: 3D Active and passive technology; InstaPort Technology; TripleFlash technology (144 Hz); SIM2's PureAction 2D/3D & PureMovie 2D technologies SIM2 Motorized Sliding Filter (SFS):: Infitec 3D and standard HDTV (Rec. 709) color reproduction filters SIM2 DynamicBlack Technology enchanced solution Contrast ratio:: >25.000:1 with DynamicBlack technology (in 2D mode) System Brightness:: up to 6.000 ANSI Lumens (in 2D mode) Lamps power consumption and lifespan:: 280W >2.000 hrs.* average life time, >3000 hrs ECO MODE

INSTALLATION

Throw ratio:: 1,82-2,48:1 (standard lens - type T2) or 1,37-1,66:1 (type T1 – on request) or 2,6-3,9:1 (type T3 - on request) Lens shift:: Vertical up to +50% down -10% max from screen center (based on image height) Digital Keystone:: +/- 18 degree Picture size:: 50-300 inches diagonal Aspect ratio:: 4:3, 16:9 Anamorphic, LetterBox, panoramic, pixel to pixel + 3 custom-user adjustments

ELECTRONICS

Horiz. & Vertical scan freq.:: 15-80 kHz/48-144 Hz Color System:: PAL (B,G,H,I,M,N,60); SECAM; NTSC 3.58; NTSC 4.43 PC graphic standards:: VGA, SVGA, XGA,SXGA, UXGA, WUXGA SDTV:: 480i/p, 576i/p; HDTV:: 720p 50/60, 1080i 50/60, 1080p 24/50/60 + 576p

C3X LUMIS INPUTS/OUTPUTS

Digital::2 x HDMI™-HDCP (with 1.4 DeepColor) Analog:: 1 x Composite Video (RCA) ::1 x Component - Analog YPbPr/RGBs (RCA x 4) ::1 x Graphic RGBHV (VGA-UXGA) (D-Sub 15 pin) Control::1 x USB (B type) ::1 x RS232 (D-Sub 9 pin) MIscellaneous::1 x 12V 100mA jack ::1 x 12V 100mA jack for 4:3/16:9 aspect ratio ::1 x 12V 100mA jack for anamorphic lens driving ::3D Sync Out

GENERAL SPECIFICATIONS

Software control:: upgradable via RS232 serial interface and USB Mains voltage range:: 100-240Vac ±10% (48/62Hz) Power consumption:: approx. 800W Projector's Weight:: 2x 11 Kg. ( 44 lbs) Single unit projector dimensions (WxHxD):: 459 x 210 x 455 (18.1" x 8.3" x 17.9") Dimensions (WxHxD):: stacking system approx. 810 x 630 x 830 mm (32" x 25" x 33")

ACCESSORIES(**)

Supplied::SIM2 Visus Active 3D glasses (4 pcs.) :: Infitec Premium Passive 3D glasses (2pcs.) :: Live Color Calibration Software 2.0 ::Installation and User Manual; ::AC power cords (2m - 6,6 ft); ::Backlit Remote control and batteries; ::Stack System Optional::SIM2 Visus Active 3D glasses (additional pairs) :: Infitec Premium Passive 3D glasses (additional pairs) ::Additional Sliding Filters (*) Lamp life: the hours quoted have been measured in a lab under ideal test conditions. Lamp life varies depending on usage conditions and the surrounding environment. This is an average value that cannot be guaranteed and is not protected by warranty. (**)the delay time may vary depending on the required accessory. Please, verify the availability with SIM2 representative