Paint with light

Paint with light


Technology:: 1 x 0.95” chip DMD Resolution:: Full HD 1920 x 1080 pixels Lighting system:: SUPER PureLED technology 3D(*) Features:: SIM2’s PureAction 2D/3D and SIM2’s PureMovie 2D technologies SIM2 DynamicBlack™ Technology enhanced solution (digital) Overlap™ Technology Contrast ratio (Full ON/OFF):: >100,000:1 with DynamicBlack™ Brightness::1200 lumens (the equivalent of 1,800 lumens(**) of lamp-based projectors) Expected LED lifetime:: 30,000 hours


Lens option (throw ratio):: 1.5-2.1:1 (type T1); ::2.1-3.9:1 (type T2) ::0.675:1 (type ST) Motorized Lens shift:: V +60% / - 25%, H +/-8% (no shift for ST lens) Digital keystone adjustment:: Vertical and Horizontal Picture size (inches diagonal):: 65-200 Aspect ratio:: 4:3, 16:9 Anamorphic, LetterBox, panoramic, pixel to pixel + 3 custom-user adjustments


Horiz. & vertical scan frequency:: 15-80kHz/48-120Hz; Color System:: PAL (B,G,H,I,M,N,60); SECAM; NTSC 3.58; NTSC 4.43 PC graphic standards:: VGA, SVGA, XGA,SXGA, UXGA, WUXGA SDTV:: 480i/p, 576i/p; HDTV:: 720p 50/60, 1080i 50/60, 1080p 24/50/60 + 576p Color Space selection:: HDTV - EBU - SMPTE-C - ADOBE RGB - CINEMA


Analog::1 x Composite Video (RCA) ::1 x Component - YCbCr/RGBs (RCA) ::1 x Graphic RGBHV/YCrCb (1x D-Sub 15 pin) Digital::2 x HDMI (v.1.4 with Deep Color) Control::1 x RS-232 ::1 x USB (B type socket) Miscellaneous:: 3D Sync Out ::3x OUT 12V (via DC Jack)


Software control:: upgradable via RS-232 serial interface or USB Power supply:: 100-240 VAC +/-10% (48/62 Hz) Power consumption:: max. 370W Projector weight:: 28 kg. / 61.7 lbs Projector dimensions (WxHxD):: 420 x 202 x 532 mm (16.5” x 8” x 21”)


Supplied:: Installation and user manual ::AC power cords (2m- 6.6 ft) ::Backlit remote control and batteries ::EasyLED 2.0 software Optional:: SIM2 VISUS Active glasses, Emitter (optional)(*) ::SIM2 VISUS Active glasses (additional pairs) :: Anamorphic Lens system (motorized or static) ::SIM2 Universal Ceiling Bracket (*) A SIM2 3D emitter and glasses pack is required to initiate this feature (sold separately). (**) Takes into account Helmholtz-Kohlrausch effect where brightness rises with color saturation. LED projectors produce richer and more saturated colors, thus appearing brighter than a lamp-based display with similar measured lumen specifications. (1) ANSI Lumen Specification: This is the typical projector brightness specification found in most sales literature. This measurement allows for direct comparison with other manufacturer’s projectors. Measurements are taken in compliance with ANSI IT7.228-1997 specification. Due to constant product development, specifications are subject to change without notice.