NERO 3D-2

Power, precision and innovation

Power, precision and innovation

LIGHT ENGINE

DLP® Type:: 1 x 0,95” chip DMD Resolution:: FULL HD 1920x1080 pixels Light source:: 280W UHP lamp Special features::3D features(*) and SIM2’s PureAction 2D/3D & PureMovie 2D technology ::SIM2 DynamicBlack™ Technology enhanced solution ::BrilliantColor™ Technology Contrast ratio (Full ON/OFF):: >30,000:1 Brightness(1):: 2,000 Ansi Lumens Lamp life expectancy(2):: 2.000 hours typical in standard power mode; 3.000 hours in ECO mode

INSTALLATION

Throw ratio standard lens:: 1.82-2.48:1 (type T2) Throw ratio optional lenses:: 1.37-1.66:1 (typ. T1) ::2.6-3.9:1 (typ. T3) Optical shift:: Vertical up to +50%, down -10% max from screen center (based on image height) Digital Keystone:: Vertical +/-18 degree Picture size (inches diagonal):: 50-250 Aspect ratio:: 4:3, 16:9, Anamorphic, Letterbox, Panoramic, pixel-to-pixel, subtitle + 3 custom-user adjustments

ELECTRONICS

Horizontal & vertical scan freq.:: 15-80kHz/48-120Hz Color System:: PAL (B,G,H,I,M,N,60); SECAM; NTSC 3.58; NTSC 4.43 PC graphic standards:: VGA, SVGA, XGA,SXGA, UXGA, WUXGA SDTV:: 480i/p, 576i/p; HDTV:: 720p 50/60, 1080i 50/60, 1080p 24/50/60 + 576p

INPUTS/OUTPUTS

Digital:: 2x HDMI (v.1.4 with Deep Color) Analog::1x Composite Video (RCA) ::1x Graphic RGBHV (D-sub HD15 pins) ::1x Component - YCbCr/RGBs (RCA) Control::1x RS-232 (D-sub 9 pins) ::1x USB (B type) Miscellaneous::3D Sync Out ::3x 12V 100mA output

GENERAL SPECIFICATIONS

Software control:: upgradable via RS232, serial interface or USB Mains voltage range:: 100-240 +/-10% (48/62 Hz) Power consumption (max.):: 440 W Projector dimensions (WxHxD):: 459 x 210 x 455 mm (18.1”x8.3”x17.9”) Projector Weight:: 11 Kg. or 24.3 lbs

ACCESSORIES

Supplied::Installation and User Manual ::AC power cords (2m - 6.6 ft) ::Backlit remote control and batteries ::Live Colors Calibration software 2.0 Optional::SIM2 VISUS 3D Active Glasses and Emitter (**) ::Projector ceiling bracket ::Anamorphic lens systems (fixed or motorized)
(1)ANSI Lumen Specification: This is the typical projector brightness specification found in most sales literature. This measurement allows for direct comparison with other manufacturer’s projectors. Measurements are taken in a totally dark test room with T3 type lens (wide angle zoom settings), brand new lamp at full power, lamp’s native white color temperature, internal test pattern (full white) and in compliance with ANSI IT7.228-1997 specification.


(2)Lamp life: the hours quoted have been measured in a lab under ideal test conditions. Lamp life varies depending on usage conditions and the surrounding environment. This is an average value that cannot be guaranteed and is not protected by warranty.


(**)A SIM2 3D emitter and glasses pack is required to initiate 3D feature.


The DLP® logo and DLP® medallion are trademarks of Texas Instruments. product specifications are subject to change without notice.


Due to constant product development, specifications and design might be subject to change without notice.