Superlumis D

Flawless 3D performance

Flawless 3D performance


DLP® Type:: 3x 0,95 DC4 DMDs Resolution:: Full-HD 1920x1080 pixels Special features:: SIM2 Perfect Fit Feature; ::3D Active and passive technology; ::InstaPort Technology; ::TripleFlash technology (144 Hz); ::SIM2's PureAction 2D/3D & PureMovie 2D Technologies SIM2 Motorized Sliding Filter (SFS):: Infitec 3D and standard HDTV (Rec. 709) color reproduction filters SIM2 DynamicBlack Technology enchanced solution Contrast ratio:: >25.000:1 with DynamicBlack technology (in 2D mode) System Brightness(1):: up to 10.000 ANSI Lumens (in 2D mode) Lamps power consumption and lifespan(2):: 350W >2.000 hrs. average life time, >3000 hrs ECO MODE


Lens type: High Brightness (HB) or Extended Contrast (EC) Throw ratio:: 1,82-2,48:1 (standard lens - type T2) or 1,37-1,66:1 (type T1 – on request) or 2,6-3,9:1 (type T3 - on request) Perfect Fit:: zoom, focus, and lens shift memory feature Lens shift:: Vertical up to +50% down -10% max from screen center (based on image height) Digital Keystone:: +/- 18 degree Picture size (inches diagonal):: 50-300 Aspect ratio:: 4:3, 16:9 Anamorphic, LetterBox, panoramic, pixel to pixel + 3 custom-user adjustments


Horiz. & Vertical scan freq.:: 15-80 kHz/48-144 Hz Color System:: PAL (B,G,H,I,M,N,60); SECAM; NTSC 3.58; NTSC 4.43 PC graphic standards:: VGA, SVGA, XGA,SXGA, UXGA, WUXGA SDTV:: 480i/p, 576i/p HDTV:: 720p 50/60, 1080i 50/60, 1080p 24/50/60 + 576p


Digital::2 x HDMI™-HDCP (with 1.4 DeepColor) Analog:: 1 x Composite Video (RCA); ::1 x Component - Analog YPbPr/RGBs (RCA x 4); ::1 x Graphic RGBHV (VGA-UXGA) (D-Sub 15 pin) Control::1 x USB (B type); ::1 x RS232 (D-Sub 9 pin) Miscellaneous::1 x 12V 100mA jack; ::1 x 12V 100mA jack for 4:3/16:9 aspect ratio; ::1 x 12V 100mA jack for anamorphic lens driving; ::3D Sync Out


Software control:: upgradable via RS232 serial interface and USB Mains voltage range:: 100-240Vac ±10% (48/62Hz) Power consumption:: approx. 800W Projector's Weight:: 2x 11 Kg. ( 44 lbs) Single unit projector dimensions (WxHxD):: 459 x 210 x 455 (18.1" x 8.3" x 17.9") Dimensions (WxHxD):: stacking system approx. 810 x 630 x 830 mm (32" x 25" x 33")


Supplied::SIM2 Visus Active 3D glasses (4 pcs.); ::Infitec Premium Passive 3D glasses (2pcs.); ::Live Color Calibration Software 2.0; ::Installation and User Manual; ::AC power cords (2m - 6,6 ft); ::Backlit Remote control and batteries; ::Stack System Optional::SIM2 Visus Active 3D glasses (additional pairs); :: Infitec Premium Passive 3D glasses (additional pairs); ::Additional Sliding Filters (3) (1) ANSI Lumen Specification: This is the typical projector brightness specification found in most sales literature. This measurement allows for direct comparison with other manufacturer’s projectors. Measurements are taken in a totally dark test room with T3 type lens (wide angle zoom settings), brand new lamp at full power, lamp’s native white color temperature, internal test pattern (full white) and in compliance with ANSI IT7.228-1997 specification. (2) Lamp life: the hours quoted have been measured in a lab under ideal test conditions. Lamp life varies depending on usage conditions and the surrounding environment. This is an average value that cannot be guaranteed and is not protected by warranty. (3) 60 day lead time after customer request and defined color gamut requirement description. This product is a custom-built-to-order and will require a 30 day lead time. Due to constant product development, specifications are subject to change without notice.